Tips for painting

Painting wooden fibre, gypsum plasterboard and similar ceilings in dry rooms

1. Clean the surfaces with a dust brush.
2. Fill deep holes and cracks with putty.
3. Smooth down the heads of screws and nails, seam locations and small uneven areas with putty.
4. Polish the treated locations with sandpaper and remove the polishing dust with a brush.
5. Embed paper seam band in the seams, using putty, and let the putty dry.
6. Smooth down the seams with putty.
7. To obtain the best result, cover the entire surface with a thin layer of putty. When working with a sprayer or roller, use putty.
8. Polish the treated locations with sandpaper and remove the polishing dust with a brush.
9. Prime the entire surface with primer.
10. Paint the surface in 2 layers using ceiling paint.
11. Clean the tools with soapy water and carefully rinse.