1. Clean the surfaces with a dust brush.
2. Fill seams and the heads of screws and nails with putty.
3. Polish the treated locations with sandpaper and remove the polishing dust with a brush.
4. Embed paper seam band in the seams, using putty. Let the putty dry.
5. Once again fill the seams with putty.
6. Polish the treated locations with sandpaper and remove the polishing dust with a brush.
7. To obtain the best result, cover the entire surface with a thin layer of putty. Polish the surface and remove the polishing dust.
8. Prime the entire surface with primer a single time.
9. Twice cover the surface with a paint finish.
10. Clean the tools with soapy water and carefully rinse.