belton, adhesion primer for plastic parts, spray

belton adhesion primer for pre-treatment of paintable rigid plastics or conventional plastic parts.

Primer and adhesion promoter for paintable rigid plastics and plastic parts. Normal plastic parts (PP, EPDM, ABS, PC, PPO, PA, PVC, PUR, PBT(B), UP-GF) can be painted with belton plastic primer and provide excellent adhesion for subsequent topcoats.

Product benefits:

• Specifically for plastics.
• Very good adhesion of subsequent coatings.
• Easy application.
• Quick-drying.
• Very good sanding properties.
• Very economical.
• Light silvery pigmentation shows where the primer has been applied.

Binder base: special polymers

Sprayable:

• 1 coat in a thin layer: 3-5 μm
• Spraying distance: 15-25 cm

Drying time:

• Dries: after approx. 15 min; can then be coated with paint.
• Dry to touch: after approx. 40 min.
• Dry on touch: after approx. 12 hours.

Can be repainted:

• by itself: at any time
• with all other belton paints: at any time.

Example of painting system:
1. belton plastic primer
2. topcoat / belton spray paint (colour tint)

Remark:
Please note the information on the label about which plastics belton plastic primer is suitable for. Always check compatibility.
Before priming, the items to be painted must be washed, degreased and, if necessary, dusted. For optimum paint adhesion, sand after priming and before priming. The surface to be painted must be clean, dry, and free of grease.