Suitable for impregnating various outdoor wooden structures such as board ends, joints, screws, nails, etc.
KRASO KOLOREX PRIMING OIL for exterior wooden surfaces
Description
KRASO Kolorex Priming Oil is a specialised product for the treatment and protection of exterior wood surfaces. It serves as a priming oil and antiseptic, mainly used to prepare the wood surface for subsequent finishing with paint. This product is particularly well suited for impregnating various exterior wooden structures such as board ends, joints, screws, nails, etc.
Why use KRASO Kolorex Priming Oil?
- Waterproof protection: KRASO Kolorex Priming Oil forms an impermeable barrier that protects wood from water ingress, preventing damage caused by moisture absorption, cracking and rotting.
- Mould protection: KRASO Kolorex Priming Oil, consisting of tung oil, linseed oil and anti-mould additives, effectively prevents the formation of blue film and mould, ensuring that your wood remains intact and attractive.
- Enhanced adhesion: Priming oil creates the perfect adhesion base for topcoat application, ensuring that your colour will stay and look flawless.
How to use:
- Surface preparation: make sure the wood is clean, dry and has a moisture content of 12-16%. In case of mould or algae stains, treat with an anti-mould disinfectant, rinse and allow to dry completely.
- Mix well and apply generously with a brush or by dipping. Pay particular attention to the ends of the boards, joints, nails and screws. Repeat until the wood no longer absorbs the oil.
- Cleaning: Clean areas where oil has not soaked in with a cloth soaked in white spirit.
Safety warning:
As rags soaked in oil may self-ignite, store in water or dry in the open air until disposal or burn immediately!
Environmental and safety considerations:
- Use personal protective equipment.
- Ensure good ventilation when handling treated surfaces.
- Dispose of used clothes in a fireproof waste container or burn under supervision.
- Do not pour liquid residues down the drain; take them to a local collection point.
Technical specifications:
Area of application: Outdoors
Binder: Alkyd / linseed oil / tung oil
Dry residue by volume: 15%
Dry residue by weight: 18%
Density: 0,82 g/cm³
Material consumption: 4-8 m²/l
Dust-proof after: 1 hour
Repaintable after: 6 hours
Shelf life: 2 years if unopened
Colour: Colourless – transparent
Flammability: Level 3
VOC category: 750 g/l (2010)
Additional information
Weight | N/A |
---|---|
Volume | 1L, 3 L, 10 L |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.