1. Lightly wet the surfaces with water, let them dry and polish the timber grain that is raised above the surface. Remove polishing dust with a moist cleaning cloth or with a vacuum cleaner.
2. Fill small cracks and scratches with a mixture of polishing dust and varnish.
3. Lightly polish the treated locations with sandpaper and remove the polishing dust with a moist cleaning cloth or with a vacuum cleaner.
4. Prime the surface with a thin layer of varnish once or twice, using a floor varnishing brush or 2-3 times using a steel spatula.
5. Varnish the surface 2-3 times using a floor varnishing brush or mohair or felt spatula.
6. Let the surface dry for approx. 4 hours between varnishing. Lightly polish the surface between varnishing and remove the polishing dust with a brush and cloth.
7. Clean the tools according to instructions on the label.