1. Remove peeling or weakly attached layers of varnish using a scraper.
2. Clean dust and dirt from the surfaces, using a dust brush. Remove resin from knot locations using a putty knife.
3. Clean surfaces with a cleaning agent, according to the instructions on the label. Carefully rinse the surfaces and let them dry.
4. Polish the old, strong layer of varnish until it becomes matted, and then remove polishing dust with a brush and cloth.
5. Putty the uneven areas with a putty of an appropriate colour tone.
6. Polish the treated locations with sandpaper and remove the polishing dust with a brush and cloth.
7. Prime the surface with a varnish that has been diluted with approx. 20% solvent.
8. Lightly polish the surface between varnishing and remove the polishing dust with a brush and cloth.
9. Varnish the surface twice using tinted or non-tinted varnish.
10. Clean the tools according to instructions on the label.